Buying guides
Choose beekeeping tools
Check the frame, hive or bucket dimensions that matter for your setup.
Choose a hive tool by the ends you need
A long pry bar is useful only if its working end fits the place you need to reach. Compare the flat edge, lever and hook on the exact tool.
Read guide ↗Match a frame grip, perch or spacer to your hive
Start with the actual frame top bar and the side of the hive. A tool that fits one wooden frame or box thickness may seat differently on molded equipment.
Read guide ↗Compare manual smoker chambers and bellows
Compare the chamber dimension, the hardware supplied and the manufacturer's operating instructions. A guard and a spare bellows solve different needs.
Read guide ↗Choose a queen marking or grafting tool
Compare the holding design and the parts you already use. A marking tube, catch clip and larva transfer tool each serve a different job.
Read guide ↗Choose an uncapping knife, fork or support
Compare the shape of the comb face and the frame support before picking an edge. A broad knife and a small fork can complement each other.
Read guide ↗Match the extractor basket and receiving bucket
Plan the harvest setup from frame size through the drain. Check capacity for your exact frames and measure the bucket the strainer will sit over. When you are processing loose comb, compare a screw press by basket volume instead of frame capacity.
Read guide ↗